FREEFLY MōVI Pro Essentials Bundle with SL4 Travel Case
At the heart of FREEFLY's MōVI Pro system is the gimbal unit. Using the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro via its D-Tap output port.
Power Surge Firmware Update
The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Mode 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain maximum torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller when filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.
Versatile "Toad in the Hole" Design
The MōVI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.
3-Axis Lens Control
Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, Mōvi controller, or a combination of the two.
RED RCP2 Integration
Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the Mōvi or MIMIC controller to adjust those settings from hundreds of feet away.
Built-In Screen
Gives the user quick access to important information
Tune/adjust parameters on the fly without a phone or computer
Enter majestic angle or time-lapse mode
Pan, tilt, roll balancing, and stiffness
Full stiffness and filter auto-tune in approximately 10 seconds
Improved Stability, Increased Torque
High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.
Power Capabilities and Compatibility
The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available Mōvi Pro, SL4-Ground, and TB50/55 batteries.
Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.
App Control
Tune and customize your gimbal in real time using the iOS and Android compatible Mōvi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.
Compatibility
For a full list of compatible cameras, please see the most current compatibility information on the FREEFLY website.
FREEFLY MōVI Ring Pro II
Do even more with your MōVI Pro by pairing it with the MōVI Ring Pro from FREEFLY. Adaptable and versatile, the MōVI Ring Pro is a carbon fiber ring to which the gimbal attaches, serving both as a stand and a handgrip by which to hold the system. Built-in feet allow for instant set down so you can rest between takes. Also, the MōVI Ring Pro enables you to set up and balance your MōVI Pro on a flat surface to execute complex pan/tilt shots remotely.
1.2"-diameter carbon fiber ring
Lightweight at 1.8 lb
Adjustable and removable handstops
Fiber-reinforced molded plastic feet
Removable top handle
Compatible with MōVI Pro, MōVI Carbon, and M-series MōVI stabilizers
UPC: 742574250688
FREEFLY MoVI Pro Landing Gear Kit
Take your MoVI Pro setup to new heights with the MoVI Pro Landing Gear Kit from FREEFLY. This kit is designed to attach to your MoVI Pro stabilizer in roughly 5 minutes, giving it lightweight carbon and aluminum landing gear that can be used with the FREEFLY ALTA 6 or ALTA 8 multi-rotor UAV.
Once installed onto an ALTA drone, the entire landing gear structure will rotate along with the gimbal for an unrestricted panning field of view. The quick release feature for the 0.6" diameter legs lets you quickly transition from aerial shooting to ground/handheld shooting.
UPC: 635414908170
FREEFLY SL4-Ground Lithium-Ion Battery for MōVI Pro and Carbon
Power your MōVI Pro or Carbon gimbal stabilizer with this SL4-Ground Lithium-Ion Battery from FREEFLY. The battery features a rechargeable 86.4Wh lithium-ion design with a 21.6V nominal voltage. Depending on the camera and accessories you utilize with the rig, it has a total runtime of 2 to 5.75 hours and can recharge in just 70 minutes. The front panel of the battery features a USB-C and proprietary ports for recharging or power additional devices, as well as a display for monitoring the battery's status.
Compatible Gimbals
FREEFLY MōVI Pro
FREEFLY MōVI Carbon
UPC: 742574252392
FREEFLY SL Battery Charger
Charge your SL4-Gound or SL8-Air battery, personal computer, or mobile device with this SL Battery Charger from FREEFLY. The charger features a USB-C port which doubles as both an input and output to supply power to your compatible battery or charge a personal device with a connected battery. A proprietary port connects to your SL4 or SL8 battery and can fully recharge either in 70 minutes or 2.5 hours. The charger has an input range of 9 to 20V and includes a USB-C cable for connection to a separately available wall adapter.
Compatibility
FREEFLY SL4-Ground batteries
FREEFLY SL8-Air batteries
UPC: 742574252668
FREEFLY Mōvi Pro SL4 Travel Case
Take your Mōvi Pro gimbal and its accessories, including the new SL4 batteries, on the go with this upgraded Mōvi Pro SL4 Travel Case from FREEFLY. With an IP67 rating, the travel case is both waterproof and dustproof to protect your equipment. Inside the case is a custom-cut foam interior with tear-out compartments that are compatible with the SL4 battery or Mōvi Pro battery for flexible configuration. Various other compartments accommodate the Mōvi Ring Pro, top handle, controller units, and other gear. Built-in wheels and a retractable handle make transporting the case across an airport or train station a breeze.
Interior Compartment Compatibility
Movi Pro gimbal
Eight SL4 or Movi Pro batteries
Two battery chargers
Movi Ring Pro and top handle
Movi controller
MIMIC and MIMIC handlebar
Movi Pro landing gear
Pilot iris/zoom and focus module, backbone, and MIMIC
Additional space for monitors and other accessories
Other Features
Industrial-strength injection-molded pull handle
In-line skate-style wheels for easy transport
Trigger-release latches can be retrofitted with TSA-accepted key locking latches
Multilayer foam insert with strap handles for easy access
Padlock holes include stainless steel padlock protector clips
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve (MIL-STD-648C)
Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
Resistant to impact damage (MIL-STD-810F)
At the heart of FREEFLY's MōVI Pro system is the gimbal unit. Using the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro via its D-Tap output port.
Power Surge Firmware Update
The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Mode 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain maximum torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller when filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.
Versatile "Toad in the Hole" Design
The MōVI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.
3-Axis Lens Control
Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, Mōvi controller, or a combination of the two.
RED RCP2 Integration
Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the Mōvi or MIMIC controller to adjust those settings from hundreds of feet away.
Built-In Screen
Gives the user quick access to important information
Tune/adjust parameters on the fly without a phone or computer
Enter majestic angle or time-lapse mode
Pan, tilt, roll balancing, and stiffness
Full stiffness and filter auto-tune in approximately 10 seconds
Improved Stability, Increased Torque
High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.
Power Capabilities and Compatibility
The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available Mōvi Pro, SL4-Ground, and TB50/55 batteries.
Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.
App Control
Tune and customize your gimbal in real time using the iOS and Android compatible Mōvi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.
Compatibility
For a full list of compatible cameras, please see the most current compatibility information on the FREEFLY website.
FREEFLY MōVI Ring Pro II
Do even more with your MōVI Pro by pairing it with the MōVI Ring Pro from FREEFLY. Adaptable and versatile, the MōVI Ring Pro is a carbon fiber ring to which the gimbal attaches, serving both as a stand and a handgrip by which to hold the system. Built-in feet allow for instant set down so you can rest between takes. Also, the MōVI Ring Pro enables you to set up and balance your MōVI Pro on a flat surface to execute complex pan/tilt shots remotely.
1.2"-diameter carbon fiber ring
Lightweight at 1.8 lb
Adjustable and removable handstops
Fiber-reinforced molded plastic feet
Removable top handle
Compatible with MōVI Pro, MōVI Carbon, and M-series MōVI stabilizers
UPC: 742574250688
FREEFLY MoVI Pro Landing Gear Kit
Take your MoVI Pro setup to new heights with the MoVI Pro Landing Gear Kit from FREEFLY. This kit is designed to attach to your MoVI Pro stabilizer in roughly 5 minutes, giving it lightweight carbon and aluminum landing gear that can be used with the FREEFLY ALTA 6 or ALTA 8 multi-rotor UAV.
Once installed onto an ALTA drone, the entire landing gear structure will rotate along with the gimbal for an unrestricted panning field of view. The quick release feature for the 0.6" diameter legs lets you quickly transition from aerial shooting to ground/handheld shooting.
UPC: 635414908170
FREEFLY SL4-Ground Lithium-Ion Battery for MōVI Pro and Carbon
Power your MōVI Pro or Carbon gimbal stabilizer with this SL4-Ground Lithium-Ion Battery from FREEFLY. The battery features a rechargeable 86.4Wh lithium-ion design with a 21.6V nominal voltage. Depending on the camera and accessories you utilize with the rig, it has a total runtime of 2 to 5.75 hours and can recharge in just 70 minutes. The front panel of the battery features a USB-C and proprietary ports for recharging or power additional devices, as well as a display for monitoring the battery's status.
Compatible Gimbals
FREEFLY MōVI Pro
FREEFLY MōVI Carbon
UPC: 742574252392
FREEFLY SL Battery Charger
Charge your SL4-Gound or SL8-Air battery, personal computer, or mobile device with this SL Battery Charger from FREEFLY. The charger features a USB-C port which doubles as both an input and output to supply power to your compatible battery or charge a personal device with a connected battery. A proprietary port connects to your SL4 or SL8 battery and can fully recharge either in 70 minutes or 2.5 hours. The charger has an input range of 9 to 20V and includes a USB-C cable for connection to a separately available wall adapter.
Compatibility
FREEFLY SL4-Ground batteries
FREEFLY SL8-Air batteries
UPC: 742574252668
FREEFLY Mōvi Pro SL4 Travel Case
Take your Mōvi Pro gimbal and its accessories, including the new SL4 batteries, on the go with this upgraded Mōvi Pro SL4 Travel Case from FREEFLY. With an IP67 rating, the travel case is both waterproof and dustproof to protect your equipment. Inside the case is a custom-cut foam interior with tear-out compartments that are compatible with the SL4 battery or Mōvi Pro battery for flexible configuration. Various other compartments accommodate the Mōvi Ring Pro, top handle, controller units, and other gear. Built-in wheels and a retractable handle make transporting the case across an airport or train station a breeze.
Interior Compartment Compatibility
Movi Pro gimbal
Eight SL4 or Movi Pro batteries
Two battery chargers
Movi Ring Pro and top handle
Movi controller
MIMIC and MIMIC handlebar
Movi Pro landing gear
Pilot iris/zoom and focus module, backbone, and MIMIC
Additional space for monitors and other accessories
Other Features
Industrial-strength injection-molded pull handle
In-line skate-style wheels for easy transport
Trigger-release latches can be retrofitted with TSA-accepted key locking latches
Multilayer foam insert with strap handles for easy access
Padlock holes include stainless steel padlock protector clips
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve (MIL-STD-648C)
Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
Resistant to impact damage (MIL-STD-810F)
At the heart of FREEFLY's MōVI Pro system is the gimbal unit. Using the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro via its D-Tap output port.
Power Surge Firmware Update
The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Mode 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain maximum torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller when filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.
Versatile "Toad in the Hole" Design
The MōVI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.
3-Axis Lens Control
Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, Mōvi controller, or a combination of the two.
RED RCP2 Integration
Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the Mōvi or MIMIC controller to adjust those settings from hundreds of feet away.
Built-In Screen
Gives the user quick access to important information
Tune/adjust parameters on the fly without a phone or computer
Enter majestic angle or time-lapse mode
Pan, tilt, roll balancing, and stiffness
Full stiffness and filter auto-tune in approximately 10 seconds
Improved Stability, Increased Torque
High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.
Power Capabilities and Compatibility
The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available Mōvi Pro, SL4-Ground, and TB50/55 batteries.
Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.
App Control
Tune and customize your gimbal in real time using the iOS and Android compatible Mōvi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.
Compatibility
For a full list of compatible cameras, please see the most current compatibility information on the FREEFLY website.
FREEFLY MōVI Ring Pro II
Do even more with your MōVI Pro by pairing it with the MōVI Ring Pro from FREEFLY. Adaptable and versatile, the MōVI Ring Pro is a carbon fiber ring to which the gimbal attaches, serving both as a stand and a handgrip by which to hold the system. Built-in feet allow for instant set down so you can rest between takes. Also, the MōVI Ring Pro enables you to set up and balance your MōVI Pro on a flat surface to execute complex pan/tilt shots remotely.
1.2"-diameter carbon fiber ring
Lightweight at 1.8 lb
Adjustable and removable handstops
Fiber-reinforced molded plastic feet
Removable top handle
Compatible with MōVI Pro, MōVI Carbon, and M-series MōVI stabilizers
UPC: 742574250688
FREEFLY MoVI Pro Landing Gear Kit
Take your MoVI Pro setup to new heights with the MoVI Pro Landing Gear Kit from FREEFLY. This kit is designed to attach to your MoVI Pro stabilizer in roughly 5 minutes, giving it lightweight carbon and aluminum landing gear that can be used with the FREEFLY ALTA 6 or ALTA 8 multi-rotor UAV.
Once installed onto an ALTA drone, the entire landing gear structure will rotate along with the gimbal for an unrestricted panning field of view. The quick release feature for the 0.6" diameter legs lets you quickly transition from aerial shooting to ground/handheld shooting.
UPC: 635414908170
FREEFLY SL4-Ground Lithium-Ion Battery for MōVI Pro and Carbon
Power your MōVI Pro or Carbon gimbal stabilizer with this SL4-Ground Lithium-Ion Battery from FREEFLY. The battery features a rechargeable 86.4Wh lithium-ion design with a 21.6V nominal voltage. Depending on the camera and accessories you utilize with the rig, it has a total runtime of 2 to 5.75 hours and can recharge in just 70 minutes. The front panel of the battery features a USB-C and proprietary ports for recharging or power additional devices, as well as a display for monitoring the battery's status.
Compatible Gimbals
FREEFLY MōVI Pro
FREEFLY MōVI Carbon
UPC: 742574252392
FREEFLY SL Battery Charger
Charge your SL4-Gound or SL8-Air battery, personal computer, or mobile device with this SL Battery Charger from FREEFLY. The charger features a USB-C port which doubles as both an input and output to supply power to your compatible battery or charge a personal device with a connected battery. A proprietary port connects to your SL4 or SL8 battery and can fully recharge either in 70 minutes or 2.5 hours. The charger has an input range of 9 to 20V and includes a USB-C cable for connection to a separately available wall adapter.
Compatibility
FREEFLY SL4-Ground batteries
FREEFLY SL8-Air batteries
UPC: 742574252668
FREEFLY Mōvi Pro SL4 Travel Case
Take your Mōvi Pro gimbal and its accessories, including the new SL4 batteries, on the go with this upgraded Mōvi Pro SL4 Travel Case from FREEFLY. With an IP67 rating, the travel case is both waterproof and dustproof to protect your equipment. Inside the case is a custom-cut foam interior with tear-out compartments that are compatible with the SL4 battery or Mōvi Pro battery for flexible configuration. Various other compartments accommodate the Mōvi Ring Pro, top handle, controller units, and other gear. Built-in wheels and a retractable handle make transporting the case across an airport or train station a breeze.
Interior Compartment Compatibility
Movi Pro gimbal
Eight SL4 or Movi Pro batteries
Two battery chargers
Movi Ring Pro and top handle
Movi controller
MIMIC and MIMIC handlebar
Movi Pro landing gear
Pilot iris/zoom and focus module, backbone, and MIMIC
Additional space for monitors and other accessories
Other Features
Industrial-strength injection-molded pull handle
In-line skate-style wheels for easy transport
Trigger-release latches can be retrofitted with TSA-accepted key locking latches
Multilayer foam insert with strap handles for easy access
Padlock holes include stainless steel padlock protector clips
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve (MIL-STD-648C)
Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
Resistant to impact damage (MIL-STD-810F)
